Manufacturing Site Selection Services
Location. Location.
Strategic location.
Site selection at the speed of business. We cut the wasted time out of the location decision and negotiate your incentives before you announce.
Built for your project. Includes an incentives analysis. In your inbox within one business day.
- Built for
- Manufacturing projects above $10M
- Free report
- In your inbox within one business day
- Fees
- Flat fees and success fees. Never hourly.
- Coverage
- Nationwide. Headquartered in Austin, TX.
The decision that sets your costs for 20 years
What is manufacturing site selection?
Manufacturing site selection is the process of choosing where to build or expand a plant. It covers defining the project’s requirements, comparing U.S. markets, evaluating specific sites on labor, utilities, logistics, and operating cost, and negotiating state and local incentives before the company commits.
Most searches take longer than they should. The delay rarely comes from the analysis. It comes from waiting between steps. We built our process to move faster than anyone else in site selection by taking that waiting out.
States negotiate these deals every week. Most manufacturers do one every few years. We close that gap, and we work for the company making the decision.
Five Points is a manufacturing site selection firm. We act as your location advisor from the first market screen through signed incentive agreements.
Why we move faster
Site selection at the speed of business
Your timeline is set by a board, a lease, a customer contract, or a production date. Ours should follow it. Here’s where we take the wasted time out.
Criteria locked on day one
We write down what the project needs before anyone looks at a map. The search never circles back to re-argue the basics.
Data before travel
We screen markets with the same data behind our mapping tool. Site visits are for real finalists, not for finding out a market doesn’t work.
Incentives in parallel
Incentives work starts with the first market screen and runs alongside site due diligence. It doesn’t wait until a site is picked.
No handoffs
Location analysis and incentives negotiation stay with one team. Nothing gets re-explained, and nothing waits on another firm.
How it works
How does the site selection process work?
Each phase ends with a written deliverable. No hourly billing: flat fees for the location work, a success fee on the incentives.
Project definition
We write down what the project needs: headcount and skills, footprint, power and water load, logistics, budget, and timeline. Most location decisions go sideways because this never gets written down.
Market identification
We screen U.S. markets against your criteria: labor, utility costs, logistics, tax climate, and the incentives each state is likely to put on the table.
Site identification
We find and compare specific properties, request utility pre-applications, review zoning and environmental issues, and coordinate site visits.
Incentives negotiation
We identify every state and local program you qualify for and negotiate them while more than one site is still in play. Tax credits, training grants, infrastructure, abatements, utility rates.
Travel and out-of-pocket costs are reimbursed at cost. Already picked a site? Phase 4 works on its own.
Consultant or broker
Site selection consultant vs. real estate broker: what’s the difference?
A site selection firm and a real estate broker will both show you sites. They get paid differently, and that shapes the advice.
| Commercial real estate broker | Five Points | |
|---|---|---|
| Starts with | Available properties | Your workforce, utility, logistics, and cost requirements |
| Paid by | Commission when a property deal closes | The company. Flat fee per phase, never hourly. |
| Incentives | Often an add-on, handled late | Worked from day one, negotiated before announcement, success fee |
| Geography | Markets where the firm has listings | National screen, narrowed by data |
| Pace | Set by listings, showings, and handoffs | Set by your deadline |
| Horizon | The transaction | 20-year operating cost |
How to choose a manufacturing site selection firm
Any site selection consultant will tell you the process works. These five questions show whether the firm works for you.
How do you get paid? Commissions on real estate create a reason to steer you toward a property. We charge flat fees for the location work and a success fee on incentives, never hourly.
Who do you work for? Some firms have standing relationships with states or regions. We work for the company making the decision.
When does incentives work start? A firm that treats incentives as a late add-on gives up leverage. We start with the first market screen.
Who does the work? Handoffs between a location team and an incentives team slow the project. Ours stays with one team.
What do I get in writing? Each phase ends in a written deliverable, from the Project Definition Report to the Incentives Strategy & Implementation Plan.
What we evaluate
What factors matter most when comparing manufacturing sites?
Every project weights these differently. We build the criteria from your specs, not a template.
Labor
Headcount, skill mix, prevailing wages, union environment, community college capacity, and turnover in your industry. We run it on every finalist before a site visit.
Utilities
Power capacity and rate structure, grid reliability, water, wastewater, gas, and fiber. Utility pre-applications on every finalist site.
Logistics
Highway, rail, port, and intermodal access. We model landed cost, not just distance.
Operating cost
State and local taxes, energy, construction, and workers’ comp. A multi-year comparison across finalists.
Incentives
What each state and county is likely to offer, and how to negotiate it without giving up leverage.
Risk
Zoning, permitting timelines, environmental baseline, and title issues that surface late and cost money.
Free for your project
What’s in a free market analysis report?
Our mapping tool compares 362 markets on general cost factors. The free report does the same work for your specific project, and adds an incentives analysis.
- Markets matched to your projectA ranked comparison built on your headcount, footprint, and requirements.
- Labor and wagesWorkforce availability and prevailing wages for the roles you need to fill.
- Operating cost comparisonHow the markets stack up on the costs that drive a plant’s budget.
- Incentives analysisThe state and local programs your project is likely to qualify for in each market.
Here’s what two recent reports looked like, with company details removed.
Each one screened U.S. markets for a specific manufacturer, compared the labor pool, wages, loaded labor cost, and industrial real estate, then laid out the state incentive programs in play for each market.
International home textile manufacturer
| Market | Workforce concentration (location quotient) | Mean wage production workers | Est. annual labor cost 75 FTE, loaded | Industrial real estate $/SF/yr |
|---|---|---|---|---|
| Dalton, GA | 156.5x~6,200 textile workers | $17.13/hr | ~$3.5M | $4 to $6 |
| Spartanburg, SC | 9.3x~1,300 textile workers | $18.97/hr | ~$3.9M | $6 to $7 |
| Greenville-Anderson, SC | 2.4xWeaving 14.5x, dyeing 16.9x | $19.59/hr | ~$4.0M | $6 to $9 |
| Greensboro-High Point, NC | 8.4x~3,900 textile workers | ~$16.50/hr | ~$3.4M | $11.13 |
| Burlington, NC | 24.4x~900 textile workers | ~$15.75/hr | ~$3.2M | $6.50 to $9.75 |
- Job Development Investment Grant (JDIG)
- One North Carolina Fund
- Community college workforce training
- Building Reuse Grants
- Job Development Credit
- FILOT with Special Source Revenue Credits
- SC Closing Fund
- Apprenticeship Carolina
- Job Tax Credit, $750 to $3,500 per job by tier
- 3% Investment Tax Credit
- Quick Start training
- Local Freeport exemptions
Wages and location quotients: BLS OEWS May 2025 (SOC 51-6099). Greensboro and Burlington figures estimated from earlier BLS tables and state averages. Loaded cost applies a 32% overhead multiplier. Real estate: current listings and regional broker data, 2025 to 2026.
International institutional furniture manufacturer
| Market | Workforce concentration (location quotient) | Mean wage | Est. annual labor cost 75 FTE, loaded | Industrial real estate $/SF/yr NNN |
|---|---|---|---|---|
| Detroit, MIBenchmark: existing U.S. location | ~1.8xAssemblers, not furniture-specific | $26.53/hr | ~$5.5M | $7 to $10 |
| Grand Rapids, MI | 11.77xWoodworking machine setters | $22.74/hr | ~$4.2M | $5.50 to $7.50 |
| Greensboro-High Point, NC | ~22xUpholstered furniture industry | $22.56/hr | ~$4.6M | $6 to $8 |
| Hickory-Lenoir-Morganton, NC | 111.23xUpholsterers, highest in the U.S. | $27.94/hrUpholsterers | ~$4.2M | $6 to $8 |
| Indianapolis, IN | ~1.0xGeneral production | ~$22.00/hr | ~$4.5M | $4.75 to $6.50 |
| Tupelo, MS | >50x est.Upholstered furniture cluster | ~$17.50/hr | ~$3.6M | $3 to $5 |
- New Jobs Training Program
- Industrial Facilities Exemption (P.A. 198)
- Strategic Site Readiness Program
- Job Development Investment Grant (JDIG)
- One NC Fund
- NC community college job training
- MFLEX income tax credits
- 10-year ad valorem tax exemption
- Sales and use tax exemption on equipment
Wages and location quotients: BLS OEWS May 2025 (Detroit May 2024). Greensboro-High Point concentration is an industry figure from Guilford County EDC. Tupelo and Indianapolis wages are state-level estimates. Loaded cost applies a 32% overhead multiplier. Real estate: 2026 market listings.
Case study
From 60 sites to one: a foreign advanced metals manufacturer’s first U.S. plant
An overseas specialty materials company needed a site for its first U.S. production facility. The plant needed port access, heavy utility capacity, and a skilled industrial workforce.
The team screened more than 60 sites in 11 states, cut the list to three finalists, and validated each one with site developers, utilities, and economic development agencies before a recommendation went to the parent company’s leadership.
The company selected a site in the South Central U.S. and secured substantial state and local incentives to support the project.
Thane Hutcheson leads site selection at Five Points. He ran site selection at national accounting and consulting firms and previously worked in Congressional offices. Degrees in Urban & Regional Planning (FSU) and Finance (UCF). More about the team · Connect on LinkedIn
Start here
Request your free market analysis
Tell us about the project. We’ll build a market and incentives analysis for it at no cost.
- Send the basicsA few details about the project. No NDA needed at this stage.
- Your report within one business dayA market and incentives analysis built for your project.
- Walk through the reportWe review the findings with you on a short call. No obligation.
Rather talk first? Book a call with Thane or email info@fivepointsstrategies.com
Your report within one business day. No cost, no obligation.
Questions
Manufacturing site selection FAQ
Short answers to what CFOs and operations leads ask us first.
What does a manufacturing site selection consultant do?
How much do manufacturing site selection services cost?
How long does the manufacturing site selection process take?
What is included in the free market analysis report?
What is the difference between a site selection consultant and a commercial real estate broker?
Should a manufacturer negotiate incentives before or after announcing a location?
Can you negotiate incentives if we have already chosen a site?
Is site selection consulting only for large manufacturers?
What states does Five Points work in?
Do you work with foreign companies entering the U.S.?
Programs by state
State incentive programs for manufacturers
Incentives often decide close calls between finalist sites. These guides cover the main programs manufacturers use in each state.
Keep going
Related tools and services
Let’s find your location
Every week spent waiting is a week of leverage and schedule you don’t get back. Start with a free market analysis built for your project.